MSDS

Neutralizing Acid Absorber

Chemical Identity
PRODUCT NAME: Neutralizing Acid Absorber

NPCA Hazard Material ID System

GENERIC NAME: Dry powder Chemical Blend Health 0
PROPER SHIPPING NAME: N/A Flammability 0
  Reactivity 0
 

Max Personal Protection Sect 8

Section I. Manufacturer's Name and Contact Information
Section II. Hazardous Ingredients/Identity Information

CHEMICAL NAME CAS No. Wt % PEL TWA-TLV CARCINOGEN
This Product Contains No Hazardous Ingredients.

Section III. Physical/Chemical Characteristics 
BOILING RANGE: N/A
VAPOR PRESSURE: N/A
VAPOR DENSITY: N/A
% VOLATILE: N/A
SOLUBILITY IN WATER: Partial / Absorbs Water
PHYSICAL DESCRIPTION: Light Brown Powder / No Odor
SPECIFIC GRAVITY: 1.4 - 1.6
pH: N/A
EVAPORATION RATE: N/A
Section IV. Fire and Explosion Hazard Data 
FLASH POINT: N/A
UPPER EXPLOSIVE LIMIT: N/A
LOWER EXPLOSIVE LIMIT: N/A
EXTINGUISHING METHOD: N/A
SPECIAL FIRE FIGHTING PROCEDURE: N/A
UNUSUAL FIRE & EXPLOSION HAZARD:
Useful in suffocating some fires
Section V. Reactivity Data 
STABILITY: Stable
INCOMPATIBILITY: None Known
HAZARDOUS DECOMPOSITION PRODUCTS: None known
HAZARDOUS POLYMERIZATION: None Known
Section VI. Health Hazard Data 
EFFECTS OF OVEREXPOSURE:
FIRST AID PROCEDURE
Skin: No adverse effects likely.
Skin: Wash residual material off skin with water.
Eyes: No adverse effects likely.
Eyes: Flush residual material from eyes with water.
Inhalation: Large amounts may irritate respiratory system.
Inhalation: Remove to fresh air.
Ingestion: Large amounts may result in nausea.
Ingestion: Induce vomiting to purge.

SHOULD SYMPTOMS PERSIST - - SEEK MEDICAL ATTENTION

Section VII. Precautions for Safe Handling and Use 
PRECAUTIONS IN HANDLING & STORAGE
For use by trained personnel only.
Keep container upright and closed during storage.
Follow good personal hygiene.
SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: Local ventilation VENTILATION: Local Ventilation.
PROTECTIVE GLOVES: Chemical resistant EYE PROTECTION: Saftey goggles or face shield.
OTHER PROTECTIVE EQUIPMENT: Follow safety procedures for material to be neutralized.
SPILL OR LEAK PROTECTION INFORMATION
MATERIAL RELEASE OF SPILL: Sweep or Vacuum. WASTE DISPOSAL METHOD: Consistent with federal, state, & local regulations.

 

Copyright 2007 © Coast Energy Corporation, Inc. All rights reserved, Wil-Power Battery Distributor, Wil-Power, Wheel Power Logo are all trademarks Coast Energy Corporation, Inc. All other products are trademarks or registered trademarks of their manufacturers.